Skip to main content
Edited from COMMENTS
Source Link

Normally they are minutes

roughly 1 page equals about 1 minute of visual time.

But it is not an exact science and here 146 pages translate to 120 minutes..

most likely this is caused by long descriptions which only take a short time time to show rather than tell.

that 1 page= 1 minute is truest for talking and some action scenes, still as they are not the same media there can be no certitudes in transforming the writen word into images.

ADD ON

"Could you provide a reference for your claim that "normally they are minutes"? All references I have found say that in a script the scenes are numbered: google.com/search?q=script+numbering – what 3 hours ago"

It is a rule of thumbs used in the movie industry; I know because it is what any inspiring screenwriter aims for. The length “standard” is a 130 page script for a 120 movie time minus 30 minutes edited out for a net result of a 90 min movie. I know because I lived in Hollywood, tried my hand at screen-writing, and had friends in the industry but I am pretty sure it is in most screenwriting manuals here is a reference:

"The common rule that many spit out is: "One page of film script equals one minute of screen time."" http://www.scriptwritingsecrets.com/Size_Matters.htm

and

"It’s true that a lot of movies clock in at 100 minutes or less, and that the one-minute-per-page rule of thumb really depends on whose thumbs are doing the measuring." http://johnaugust.com/2003/script-length

If your demand for clarifications was about the numbering, a "Shooting" script is not a regular script; it has been modified by the director for convenience

"Shooting scripts are distinct from spec scripts in that they make use of scene numbers (along with certain other formatting conventions described below), and they follow a well defined set of procedures specifying how script revisions should be implemented and circulated." http://en.wikipedia.org/wiki/Shooting_script

Edited from COMMENTS, someone can find this helpfull in the future...

”confusing that each scene corresponds to a number” […] you mean that an answer regarding this specific script by no means is applicable to any other?"

That’s probably a shooting script, also remember that there are no real standards, there are preferred versions only, it is a loose industry and I have seen very big exceptions to some commonly held rules. Basically, if you are good, you can do what you want, they will buy it and a hired screenwriter will polish it, also some directors have individual preferences and their scripts may reflect that. What you have to remember is that a script is not a final version, it is only an intermediary step to a final product, so pretty much anything goes.

while they are common rules, or rules of thumb, there is no law, and while there can be exceptions a regular script is about 1m=1p, after it is bought it can be transformed in various ways, the scene numbers in working scripts are because scenes are shot out of order in filming. Yes both you and What were right about shooting scripts, but the published version of a script is more often the speculative script and sometimes the post-movie script. Also what I know is movies; things may be different in other Medias

Normally they are minutes

roughly 1 page equals about 1 minute of visual time.

But it is not an exact science and here 146 pages translate to 120 minutes..

most likely this is caused by long descriptions which only take a short time time to show rather than tell.

that 1 page= 1 minute is truest for talking and some action scenes, still as they are not the same media there can be no certitudes in transforming the writen word into images.

ADD ON

"Could you provide a reference for your claim that "normally they are minutes"? All references I have found say that in a script the scenes are numbered: google.com/search?q=script+numbering – what 3 hours ago"

It is a rule of thumbs used in the movie industry; I know because it is what any inspiring screenwriter aims for. The length “standard” is a 130 page script for a 120 movie time minus 30 minutes edited out for a net result of a 90 min movie. I know because I lived in Hollywood, tried my hand at screen-writing, and had friends in the industry but I am pretty sure it is in most screenwriting manuals here is a reference:

"The common rule that many spit out is: "One page of film script equals one minute of screen time."" http://www.scriptwritingsecrets.com/Size_Matters.htm

and

"It’s true that a lot of movies clock in at 100 minutes or less, and that the one-minute-per-page rule of thumb really depends on whose thumbs are doing the measuring." http://johnaugust.com/2003/script-length

If your demand for clarifications was about the numbering, a "Shooting" script is not a regular script; it has been modified by the director for convenience

"Shooting scripts are distinct from spec scripts in that they make use of scene numbers (along with certain other formatting conventions described below), and they follow a well defined set of procedures specifying how script revisions should be implemented and circulated." http://en.wikipedia.org/wiki/Shooting_script

Normally they are minutes

roughly 1 page equals about 1 minute of visual time.

But it is not an exact science and here 146 pages translate to 120 minutes..

most likely this is caused by long descriptions which only take a short time time to show rather than tell.

that 1 page= 1 minute is truest for talking and some action scenes, still as they are not the same media there can be no certitudes in transforming the writen word into images.

ADD ON

"Could you provide a reference for your claim that "normally they are minutes"? All references I have found say that in a script the scenes are numbered: google.com/search?q=script+numbering – what 3 hours ago"

It is a rule of thumbs used in the movie industry; I know because it is what any inspiring screenwriter aims for. The length “standard” is a 130 page script for a 120 movie time minus 30 minutes edited out for a net result of a 90 min movie. I know because I lived in Hollywood, tried my hand at screen-writing, and had friends in the industry but I am pretty sure it is in most screenwriting manuals here is a reference:

"The common rule that many spit out is: "One page of film script equals one minute of screen time."" http://www.scriptwritingsecrets.com/Size_Matters.htm

and

"It’s true that a lot of movies clock in at 100 minutes or less, and that the one-minute-per-page rule of thumb really depends on whose thumbs are doing the measuring." http://johnaugust.com/2003/script-length

If your demand for clarifications was about the numbering, a "Shooting" script is not a regular script; it has been modified by the director for convenience

"Shooting scripts are distinct from spec scripts in that they make use of scene numbers (along with certain other formatting conventions described below), and they follow a well defined set of procedures specifying how script revisions should be implemented and circulated." http://en.wikipedia.org/wiki/Shooting_script

Edited from COMMENTS, someone can find this helpfull in the future...

”confusing that each scene corresponds to a number” […] you mean that an answer regarding this specific script by no means is applicable to any other?"

That’s probably a shooting script, also remember that there are no real standards, there are preferred versions only, it is a loose industry and I have seen very big exceptions to some commonly held rules. Basically, if you are good, you can do what you want, they will buy it and a hired screenwriter will polish it, also some directors have individual preferences and their scripts may reflect that. What you have to remember is that a script is not a final version, it is only an intermediary step to a final product, so pretty much anything goes.

while they are common rules, or rules of thumb, there is no law, and while there can be exceptions a regular script is about 1m=1p, after it is bought it can be transformed in various ways, the scene numbers in working scripts are because scenes are shot out of order in filming. Yes both you and What were right about shooting scripts, but the published version of a script is more often the speculative script and sometimes the post-movie script. Also what I know is movies; things may be different in other Medias

added 154 characters in body
Source Link

Normally they are minutes

roughly 1 page equals about 1 minute of visual time.

But it is not an exact science and here 146 pages translate to 120 minutes..

most likely this is caused by long descriptions which only take a short time time to show rather than tell.

that 1 page= 1 minute is truest for talking and some action scenes, still as they are not the same media there can be no certitudes in transforming the writen word into images.

ADD ON

"Could you provide a reference for your claim that "normally they are minutes"? All references I have found say that in a script the scenes are numbered: google.com/search?q=script+numbering – what 3 hours ago"

It is a rule of thumbs used in the movie industry; I know because it is what any inspiring screenwriter aims for. The length “standard” is a 130 page script for a 120 movie time minus 30 minutes edited out for a net result of a 90 min movie. I know because I lived in Hollywood, tried my hand at scriptsscreen-writing, and had friends in the industry but I am pretty sure it is in most screenwriting manuals here is a reference:

"The common rule that many spit out is: "One page of film script equals one minute of screen time."" http://www.scriptwritingsecrets.com/Size_Matters.htm

and

"It’s true that a lot of movies clock in at 100 minutes or less, and that the one-minute-per-page rule of thumb really depends on whose thumbs are doing the measuring." http://johnaugust.com/2003/script-length

If your demand for clarifications was about the numbering, a "Shooting" script is not a regular script; it has been modified by the director for convenience

"Shooting scripts are distinct from spec scripts in that they make use of scene numbers (along with certain other formatting conventions described below), and they follow a well defined set of procedures specifying how script revisions should be implemented and circulated." http://en.wikipedia.org/wiki/Shooting_script

Normally they are minutes

roughly 1 page equals about 1 minute of visual time.

But it is not an exact science and here 146 pages translate to 120 minutes..

most likely this is caused by long descriptions which only take a short time time to show rather than tell.

that 1 page= 1 minute is truest for talking and some action scenes, still as they are not the same media there can be no certitudes in transforming the writen word into images.

ADD ON

"Could you provide a reference for your claim that "normally they are minutes"? All references I have found say that in a script the scenes are numbered: google.com/search?q=script+numbering – what 3 hours ago"

It is a rule of thumbs used in the movie industry; I know because it is what any inspiring screenwriter aims for. The length “standard” is a 130 page script for a 120 movie time minus 30 minutes edited out for a net result of a 90 min movie. I know because I lived in Hollywood, tried my hand at scripts, and had friends in the industry but I am pretty sure it is in most screenwriting manuals here is a reference:

"The common rule that many spit out is: "One page of film script equals one minute of screen time."" http://www.scriptwritingsecrets.com/Size_Matters.htm

and

"It’s true that a lot of movies clock in at 100 minutes or less, and that the one-minute-per-page rule of thumb really depends on whose thumbs are doing the measuring." http://johnaugust.com/2003/script-length

Normally they are minutes

roughly 1 page equals about 1 minute of visual time.

But it is not an exact science and here 146 pages translate to 120 minutes..

most likely this is caused by long descriptions which only take a short time time to show rather than tell.

that 1 page= 1 minute is truest for talking and some action scenes, still as they are not the same media there can be no certitudes in transforming the writen word into images.

ADD ON

"Could you provide a reference for your claim that "normally they are minutes"? All references I have found say that in a script the scenes are numbered: google.com/search?q=script+numbering – what 3 hours ago"

It is a rule of thumbs used in the movie industry; I know because it is what any inspiring screenwriter aims for. The length “standard” is a 130 page script for a 120 movie time minus 30 minutes edited out for a net result of a 90 min movie. I know because I lived in Hollywood, tried my hand at screen-writing, and had friends in the industry but I am pretty sure it is in most screenwriting manuals here is a reference:

"The common rule that many spit out is: "One page of film script equals one minute of screen time."" http://www.scriptwritingsecrets.com/Size_Matters.htm

and

"It’s true that a lot of movies clock in at 100 minutes or less, and that the one-minute-per-page rule of thumb really depends on whose thumbs are doing the measuring." http://johnaugust.com/2003/script-length

If your demand for clarifications was about the numbering, a "Shooting" script is not a regular script; it has been modified by the director for convenience

"Shooting scripts are distinct from spec scripts in that they make use of scene numbers (along with certain other formatting conventions described below), and they follow a well defined set of procedures specifying how script revisions should be implemented and circulated." http://en.wikipedia.org/wiki/Shooting_script

Add on
Source Link

Normally they are minutes

roughly 1 page equals about 1 minute of visual time.

But it is not an exact science and here 146 pages translate to 120 minutes..

most likely this is caused by long descriptions which only take a short time time to show rather than tell.

that 1 page= 1 minute is truest for talking and some action scenes, still as they are not the same media there can be no certitudes in transforming the writen word into images.

ADD ON

"Could you provide a reference for your claim that "normally they are minutes"? All references I have found say that in a script the scenes are numbered: google.com/search?q=script+numbering – what 3 hours ago"

It is a rule of thumbs used in the movie industry; I know because it is what any inspiring screenwriter aims for. The length “standard” is a 130 page script for a 120 movie time minus 30 minutes edited out for a net result of a 90 min movie. I know because I lived in Hollywood, tried my hand at scripts, and had friends in the industry but I am pretty sure it is in most screenwriting manuals here is a reference:

"The common rule that many spit out is: "One page of film script equals one minute of screen time."" http://www.scriptwritingsecrets.com/Size_Matters.htm

and

"It’s true that a lot of movies clock in at 100 minutes or less, and that the one-minute-per-page rule of thumb really depends on whose thumbs are doing the measuring." http://johnaugust.com/2003/script-length

Normally they are minutes

roughly 1 page equals about 1 minute of visual time.

But it is not an exact science and here 146 pages translate to 120 minutes..

most likely this is caused by long descriptions which only take a short time time to show rather than tell.

that 1 page= 1 minute is truest for talking and some action scenes, still as they are not the same media there can be no certitudes in transforming the writen word into images.

Normally they are minutes

roughly 1 page equals about 1 minute of visual time.

But it is not an exact science and here 146 pages translate to 120 minutes..

most likely this is caused by long descriptions which only take a short time time to show rather than tell.

that 1 page= 1 minute is truest for talking and some action scenes, still as they are not the same media there can be no certitudes in transforming the writen word into images.

ADD ON

"Could you provide a reference for your claim that "normally they are minutes"? All references I have found say that in a script the scenes are numbered: google.com/search?q=script+numbering – what 3 hours ago"

It is a rule of thumbs used in the movie industry; I know because it is what any inspiring screenwriter aims for. The length “standard” is a 130 page script for a 120 movie time minus 30 minutes edited out for a net result of a 90 min movie. I know because I lived in Hollywood, tried my hand at scripts, and had friends in the industry but I am pretty sure it is in most screenwriting manuals here is a reference:

"The common rule that many spit out is: "One page of film script equals one minute of screen time."" http://www.scriptwritingsecrets.com/Size_Matters.htm

and

"It’s true that a lot of movies clock in at 100 minutes or less, and that the one-minute-per-page rule of thumb really depends on whose thumbs are doing the measuring." http://johnaugust.com/2003/script-length

added 195 characters in body
Source Link
Loading
Source Link
Loading